Shop
R9S06191 – Switch Disconnector, Resi9, 1P, 100A
R9S06191 – switch disconnector, Resi9, 1P, 100A
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a switch disconnector. It is a 1P switch disconnector with 100A In rated current. This switch disconnector is used for control (opening and closing of circuits under load). This product is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. It has a position contact indication suitable for industrial isolation according to IEC 60947-3 standard. It is targeted to residential for individual and collective buildings. The Ue rated operational current is 230VAC. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 2 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x (D) 75mm. The IP degree of protection is IP20 and IP40 in enclosure. The operating temperature is -25 °C to 70°C. The storage temperature is -40°C to 70°C. The operating temperature is -25 °C to 70°C. The storage temperature is -40°C to 70°C.
R9S06291 – Switch Disconnector, Resi9, 2P, 100A
R9S06291 – switch disconnector, Resi9, 2P, 100A
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a switch disconnector. It is a 2P switch disconnector with 100A In rated current. This switch disconnector is used for control (opening and closing of circuits under load). This product is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. It has a position contact indication suitable for industrial isolation according to IEC 60947-3 standard. It is targeted to residential for individual and collective buildings. The Ue rated operational current is 400VAC. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 4 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 75mm. The IP degree of protection is IP20 and IP40 in enclosure. The operating temperature is -25 °C to 70°C. The storage temperature is -40°C to 70°C. The operating temperature is -25 °C to 70°C. The storage temperature is -40°C to 70°C.
R9S06391 – Switch Disconnector, Resi9, 3P, 100A
R9S06391 – switch disconnector, Resi9, 3P, 100A
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a switch disconnector. It is a 3P switch disconnector with 100A In rated current. This switch disconnector is used for control (opening and closing of circuits under load). This product is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. It has a position contact indication suitable for industrial isolation according to IEC 60947-3 standard. It is targeted to residential for individual and collective buildings. The Ue rated operational current is 400VAC. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 6 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 54mm x (H) 85mm x (D) 75mm. The IP degree of protection is IP20 and IP40 in enclosure. The operating temperature is -25 °C to 70°C. The storage temperature is -40°C to 70°C. The operating temperature is -25 °C to 70°C. The storage temperature is -40°C to 70°C.
RCBO 1-Pole 10A 6KA KNO
HNB RCBO – 1 Pole, 10A, 6kA, Type KNO
The HNB 1-Pole RCBO (Residual Current Breaker with Overcurrent protection) combines earth leakage and short-circuit protection in a single compact unit. Designed for residential and light commercial applications, it ensures personal safety and circuit protection with fast disconnection under fault conditions.
Product Features:
Type: RCBO (Residual Current Circuit Breaker with Overcurrent protection)
Pole Configuration: 1P
Rated Current: 10A
Breaking Capacity: 6kA
Tripping Curve: Type KNO
Voltage: 230V AC
Frequency: 50Hz
Mounting: DIN rail compatible
Application: Suitable for final sub-circuits requiring both RCD and MCB protection
Standards Compliance: AS/NZS 61009
A reliable safety device for protecting people and property against earth faults, overloads, and short circuits in a single-pole circuit.
RCBO 1-Pole 16A 6KA KNO
Specifications:
Brand: HNB
Type: RCBO (Residual Current Circuit Breaker with Overcurrent Protection)
Poles: 1-pole
Rated current: 16A
Breaking capacity: 6kA
Application: Electrical protection for distribution systems
Usage Scenarios:
Residential distribution boards
Commercial switchboards requiring RCBO protection
Light industrial electrical panels
RCBO 1-Pole 20A 6KA KNO
The HNB 1-pole RCBO (Residual Current Breaker with Overcurrent protection) provides integrated protection against earth leakage, overloads, and short circuits in a single compact unit. Designed for residential and light commercial use, it ensures compliance with AS/NZS standards and offers reliable safety for final sub-circuits.
Product Features:
Type: RCBO (Residual Current Breaker with Overcurrent protection)
Pole Configuration: 1P
Rated Current: 20A
Breaking Capacity: 6kA
Tripping Curve: Type KNO
Rated Residual Current (IΔn): 30mA
Rated Voltage: 230V AC, 50Hz
Mounting: Standard DIN rail
Terminal Capacity: 1–16mm²
Operating Temperature: –5°C to +40°C
Housing Material: Flame-retardant thermoplastic
Indicators: ON/OFF status indicator
Earth Leakage Type: Type A (detects AC and pulsating DC faults)
Standards Compliance: AS/NZS 61009.1
Application: Final sub-circuit protection for residential or small commercial installations
Typical Use:
Ideal for lighting and power circuits that require both residual current and overcurrent protection in a single-pole configuration.
RCBO 1-Pole 25A 6KA KNO
Key Features:
Integrated RCD + MCB Protection
30mA Earth Leakage Sensitivity
6kA Short Circuit Breaking Capacity
C-Curve Tripping for General-Purpose Loads
Compact Design for DIN Rail Installation
Flame-Retardant, Durable Housing
Test Button for Routine Safety Checks
Clear ON/OFF Toggle Position Indicator
Fully Certified to AS/NZS 61009.1
RCBO 1-Pole 32A 6KA KNO
Applications:
Ideal for final sub-circuits requiring both overcurrent and residual current protection, such as power outlets, water heaters, or air conditioning units.
RCBO Resi9, 1P+N, 6A, C curve, 6000A, A type, 30mA
R9D06606 – Residual current breaker with overcurrent protection (RCBO), Resi9, 1P+N, 6A, C curve, 6000A, A type, 30mA
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 6A rated current (In) at 30°C conforming to AS/NZS 61009.1 standard and the C tripping curve. The earth leakage protection class is type A with a sensitivity of 30mA. The earth-leakage protection time delay is an instantaneous. The breaking capacity (Icn) is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compatible with comb busbar and distribution block. It has a tunnel type terminal connection. The connection allows rigid copper cables from 1mm² to 16mm². It has a tunnel type terminal connection. The connection allows flexible copper cables from 1mm² to 10mm². The rated operational voltage (Ue) is up to 230VAC. The operating frequency is from 50Hz to 60Hz. The rated insulation voltage (Ui) is up to 440VAC. It has a rated impulse withstand voltage (Uimp) of 4kV. It has a RCM quality lable. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 93mm x (D) 73mm. The product colour is white (RAL 9003). The product weight is 136g. The pollution degree is 2, the overvoltage category is III and the limitation class is 3. According to IEC 60529 standard, the degree of protection is IP20. The operating temperature is from -25°C to +70°C. This product complies with IEC 61009-2-2, EN/IEC 61009-1 and AS/NZS 61009.1 standards.
RCBO, Resi9, 1P+N, 10A, C curve, 6000A, A type, 30mA, 18mm wide
R9D06610 – Residual current breaker with overcurrent protection (RCBO), Resi9, 1P+N, 10A, C curve, 6000A, A type, 30mA, 18mm wide
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 10A rated current (In) at 30°C conforming to AS/NZS 61009.1 standard and the C tripping curve. The earth leakage protection class is type A with a sensitivity of 30mA. The earth-leakage protection time delay is an instantaneous. The breaking capacity (Icn) is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compatible with comb busbar and distribution block. It has a tunnel type terminal connection at top. The connection allows rigid copper cables from 1mm² to 16mm². It has a tunnel type terminal connection at top. The connection allows flexible copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows rigid copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows flexible copper cables from 1mm² to 6mm². The rated operational voltage (Ue) is up to 230VAC. The operating frequency is from 50Hz to 60Hz. The rated insulation voltage (Ui) is up to 400VAC. It has a rated impulse withstand voltage (Uimp) of 4kV. It has a RCM quality lable. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 93mm x (D) 73mm. The product colour is white (RAL 9003). The product weight is 136g. The pollution degree is 2, the overvoltage category is III and the limitation class is 3. According to IEC 60529 standard, the degree of protection is IP20. The operating temperature is from -25°C to +70°C. This product complies with IEC 61009-2-2, EN/IEC 61009-1 and AS/NZS 61009.1 standards.
RCBO, Resi9, 1P+N, 16A, C curve, 6000A, A type, 30mA, 18mm wide
R9D06616 – Residual current breaker with overcurrent protection (RCBO), Resi9, 1P+N, 16A, C curve, 6000A, A type, 30mA, 18mm wide
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 16A rated current (In) at 30°C conforming to AS/NZS 61009.1 standard and the C tripping curve. The earth leakage protection class is type A with a sensitivity of 30mA. The earth-leakage protection time delay is an instantaneous. The breaking capacity (Icn) is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compatible with comb busbar and distribution block. It has a tunnel type terminal connection at top. The connection allows rigid copper cables from 1mm² to 16mm². It has a tunnel type terminal connection at top. The connection allows flexible copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows rigid copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows flexible copper cables from 1mm² to 6mm². The rated operational voltage (Ue) is up to 230VAC. The operating frequency is from 50Hz to 60Hz. The rated insulation voltage (Ui) is up to 400VAC. It has a rated impulse withstand voltage (Uimp) of 4kV. It has a RCM quality lable. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 93mm x (D) 73mm. The product colour is white (RAL 9003). The product weight is 136g. The pollution degree is 2, the overvoltage category is III and the limitation class is 3. According to IEC 60529 standard, the degree of protection is IP20. The operating temperature is from -25°C to +70°C. This product complies with IEC 61009-2-2, EN/IEC 61009-1 and AS/NZS 61009.1 standards.
RCBO, Resi9, 1P+N, 20A, C curve, 6000A, A type, 30mA, 18mm wide
R9D06620 – Residual current breaker with overcurrent protection (RCBO), Resi9, 1P+N, 20A, C curve, 6000A, A type, 30mA, 18mm wide
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 20A rated current (In) at 30°C conforming to AS/NZS 61009.1 standard and the C tripping curve. The earth leakage protection class is type A with a sensitivity of 30mA. The earth-leakage protection time delay is an instantaneous. The breaking capacity (Icn) is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compatible with comb busbar and distribution block. It has a tunnel type terminal connection at top. The connection allows rigid copper cables from 1mm² to 16mm². It has a tunnel type terminal connection at top. The connection allows flexible copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows rigid copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows flexible copper cables from 1mm² to 6mm². The rated operational voltage (Ue) is up to 230VAC. The operating frequency is from 50Hz to 60Hz. The rated insulation voltage (Ui) is up to 400VAC. It has a rated impulse withstand voltage (Uimp) of 4kV. It has a RCM quality lable. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 93mm x (D) 73mm. The product colour is white (RAL 9003). The product weight is 136g. The pollution degree is 2, the overvoltage category is III and the limitation class is 3. According to IEC 60529 standard, the degree of protection is IP20. The operating temperature is from -25°C to +70°C. This product complies with IEC 61009-2-2, EN/IEC 61009-1 and AS/NZS 61009.1 standards.
RCBO, Resi9, 1P+N, 25A, C curve, 6000A, A type, 30mA, 18mm wide
R9D06625 – Residual current breaker with overcurrent protection (RCBO), Resi9, 1P+N, 25A, C curve, 6000A, A type, 30mA, 18mm wide
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 25A rated current (In) at 30°C conforming to AS/NZS 61009.1 standard and the C tripping curve. The earth leakage protection class is type A with a sensitivity of 30mA. The earth-leakage protection time delay is an instantaneous. The breaking capacity (Icn) is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compatible with comb busbar and distribution block. It has a tunnel type terminal connection at top. The connection allows rigid copper cables from 1mm² to 16mm². It has a tunnel type terminal connection at top. The connection allows flexible copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows rigid copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows flexible copper cables from 1mm² to 6mm². The rated operational voltage (Ue) is up to 230VAC. The operating frequency is from 50Hz to 60Hz. The rated insulation voltage (Ui) is up to 400VAC. It has a rated impulse withstand voltage (Uimp) of 4kV. It has a RCM quality lable. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 93mm x (D) 73mm. The product colour is white (RAL 9003). The product weight is 136g. The pollution degree is 2, the overvoltage category is III and the limitation class is 3. According to IEC 60529 standard, the degree of protection is IP20. The operating temperature is from -25°C to +70°C. This product complies with IEC 61009-2-2, EN/IEC 61009-1 and AS/NZS 61009.1 standards.
RCBO, Resi9, 1P+N, 32A, C curve, 6000A, A type, 30mA, 18mm wide
R9D06632 – Residual current breaker with overcurrent protection (RCBO), Resi9, 1P+N, 32A, C curve, 6000A, A type, 30mA, 18mm wide
Part of the: Schneider Electric Resi9 Range
This Resi9 product is a residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole, 32A rated current (In) at 30°C conforming to AS/NZS 61009.1 standard and the C tripping curve. The earth leakage protection class is type A with a sensitivity of 30mA. The earth-leakage protection time delay is an instantaneous. The breaking capacity (Icn) is up to 6000A at 230VAC with operating frequency of 50Hz to 60Hz. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compatible with comb busbar and distribution block. It has a tunnel type terminal connection at top. The connection allows rigid copper cables from 1mm² to 16mm². It has a tunnel type terminal connection at top. The connection allows flexible copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows rigid copper cables from 1mm² to 10mm². It has a tunnel type terminal connection at bottom. The connection allows flexible copper cables from 1mm² to 6mm². The rated operational voltage (Ue) is up to 230VAC. The operating frequency is from 50Hz to 60Hz. The rated insulation voltage (Ui) is up to 400VAC. It has a rated impulse withstand voltage (Uimp) of 4kV. It has a RCM quality lable. The width in 9mm pitches is 2. The dimensions are (W) 18mm x (H) 93mm x (D) 73mm. The product colour is white (RAL 9003). The product weight is 136g. The pollution degree is 2, the overvoltage category is III and the limitation class is 3. According to IEC 60529 standard, the degree of protection is IP20. The operating temperature is from -25°C to +70°C. This product complies with IEC 61009-2-2, EN/IEC 61009-1 and AS/NZS 61009.1 standards.
Single 10AMP Powerpoint Horizontal Classic
COLOUR & FINISH Glossy white
Single socket outlet with individual single pole rocker switches
Mounting centre: 84mm
Plate Thickness: 13mm
Plate size 118mm (W) x 74mm (H)
Rated Voltage 250V 10AC
2.5mm² cable
Compliance AS/NZS 3112; AS/NZS 3100